Netgear STM150 User Manual download pdf (Page 18)

ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual

1-6 Introduction

v1.1, March 2009

Default IP Address, Login Name, and Password Location

Check the label on the bottom of the STM150’s enclosure if you need a reminder of the following

factory default information:

Choosing a Location for the STM150

The STM150 is suitable for use in an office environment where it can be free-standing or mounted

in a standard 19-inch equipment rack. Alternatively, you can rack-mount the STM150 in a wiring

closet or equipment room. A mounting kit, containing two mounting brackets and four screws, is

provided in the STM150 package.

When deciding where to position the STM150, ensure that:

• It is accessible and cables can be connected easily.

• Cabling is away from sources of electrical noise. These include lift shafts, microwave ovens,

and air conditioning units.

• Water or moisture cannot enter the case of the unit.

• Airflow around the unit and through the vents in the side of the case is not restricted. Provide a

minimum of 25 mm or 1 inch clearance.

• The air is as free of dust as possible.

• Temperature operating limits are not likely to be exceeded. Install the unit in a clean, air-

conditioned environment. For information on the recommended operating temperatures for the

STM150, refer to Appendix A, “Default Settings and Technical Specifications.

Figure 1-4

IP Address

User Name

Password

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 94 95

No comments

Netgear STM150 User Manual Page 18