Netgear GS728TP User Manual download pdf (Page 432)

100

101

Managing Device Security

432

ProSafe M5300 Switch

Captive Portal User Configuration

When you click Add from the CP User Configuration page, the screen refreshes, and you can

add a new user to the Local User database.

To display the Captive Portal User Configuration page, click Security  Control> Captive

Portal

 CP User Configuration.

1. User ID identifies the name of the user.

2. Use User Name to enter the name of the user. Name can contain 1 to 31 alphanumeric

characters. User names once created cannot be changed/modified.

3. Set Edit Password to “Enable” only when you want to change the password. The default

value is “Disable”.

4. Use Password to enter a password for the user. The password length can be from 8 to 64

characters.

5. Use Confirm Password to enter the password for the user again.

6. Use Group to assign the user to at least one User Group. To assign a user to more than

one group, press the Ctrl key and click each group. New users are assigned to the 1-Default

user group by default.

7. Use Session Timeout to enter the number of seconds a user is permitted to remain

connected to the network. Once the Session Timeout value is reached, the user is logged

out automatically. A value of 0 means that the user does not have a Session Timeout limit.

The valid range is 0 to 86400 seconds and the default value is 0.

8. Use Idle Timeout to enable Logout once idle time-out is reached (seconds). If the attribute

is 0 or not present then use the value configured for the captive portal.

9. Use Max Bandwidth Down to specify the maximum rate (Rate in bits per seconds) at which

a client can receive data from the network. 0 indicates use global configuration (Range: 0 –

536870911 bps.)

1 2 ... 427 428 429 430 431 432 433 434 435 436 437 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 432

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP