Netgear GS728TP User Manual Page 415

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 414
Managing Device Security
415
ProSafe M5300 Switch
DHCP Snooping Global Configuration
Use this page to configure the administrative mode of DHCP snooping on the switch and to
enable DHCP snooping on VLANS. When enabled on a VLAN, DHCP snooping forwards
valid DHCP client messages it receives in the VLAN. The message is forwarded on all
trusted interfaces in the VLAN.
To display the DHCP Snooping Global Configuration page, click Security
Control> DHCP
Snooping
Global Configuration.
DHCP Snooping Configuration
1. Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature. The
factory default is disabled.
2. Use MAC Address Validation to enable or disable the validation of sender MAC Address
for DHCP Snooping. The factory default is enabled.
DHCP Snooping VLAN Configuration
1. Use VLAN ID to enter the VLAN for which the DHCP Snooping Mode is to be enabled.
2. Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature for the
specified VLAN. The factory default is disabled.
3. Click APPLY to apply the new configuration and cause the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is performed.
4. Click CANCEL to abandon the changes.
Page view 414
1 2 ... 410 411 412 413 414 415 416 417 418 419 420 ... 529 530

Comments to this Manuals

No comments