Netgear GS728TP User Manual download pdf (Page 391)

Managing Device Security

391

ProSafe M5300 Switch

• auto - The authenticator PAE sets the controlled port mode to reflect the outcome

of the authentication exchanges between the supplicant, authenticator, and the

authentication server.

• mac based - The authenticator PAE sets the controlled port mode to reflect the

outcome of the authentication exchanges between the supplicant, authenticator,

and the authentication server on a per supplicant basis.

• Quiet Period - This input field allows the user to configure the quiet period for the

selected port. This command sets the value, in seconds, of the timer used by the

authenticator state machine on this port to define periods of time in which it will not

attempt to acquire a supplicant. The quiet period is the period for which the

authenticator does not attempt to acquire a supplicant after a failed authentication

exchange with the supplicant. The quiet period must be a number in the range of 0

and 65535. A quiet period value of 0 means that the authenticator state machine will

never acquire a supplicant. The default value is 60. Changing the value will not

change the configuration until the APPLY button is pressed.

• Transmit Period - This input field allows the user to configure the transmit period for

the selected port. The transmit period is the value, in seconds, of the timer used by

the authenticator state machine on the specified port to determine when to send an

EAPOL EAP Request/Identity frame to the supplicant. The transmit period must be a

number in the range of 1 and 65535. The default value is 30. Changing the value will

not change the configuration until the APPLY button is pressed.

• Guest VLAN Id - This field allows the user to configure Guest VLAN ID on the

interface. The valid range is 0-3965.The default value is 0. Changing the value will not

change the configuration until the APPLY button is pressed. Enter 0 to clear the

Guest VLAN ID on the interface.

• Guest VLAN Period - This input field allows the user to enter the guest VLAN period

for the selected port. The guest VLAN period is the value, in seconds, of the timer

used by the Guest VLAN Authentication. The guest VLAN time-out must be a value in

the range of 1 and 300. The default value is 90. Changing the value will not change

the configuration until the APPLY button is pressed.

• Unauthenticated VLAN ID - This input field allows the user to enter the

Unauthenticated VLAN ID for the selected port. The valid range is 0-3965.The default

value is 0. Changing the value will not change the configuration until the Submit

button is pressed. Enter 0 to clear the Unauthenticated VLAN ID on the interface.

• Supplicant Timeout - This input field allows the user to enter the supplicant time-out

for the selected port. The supplicant time-out is the value, in seconds, of the timer

used by the authenticator state machine on this port to time-out the supplicant. The

supplicant time-out must be a value in the range of 1 and 65535. The default value is

30. Changing the value will not change the configuration until the APPLY button is

pressed.

• Server Timeout - This input field allows the user to enter the server time-out for the

selected port. The server time-out is the value, in seconds, of the timer used by the

authenticator on this port to time-out the authentication server. The server time-out

must be a value in the range of 1 and 65535. The default value is 30. Changing the

value will not change the configuration until the APPLY button is pressed.

1 2 ... 386 387 388 389 390 391 392 393 394 395 396 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 391

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP