Netgear GS728TP User Manual download pdf (Page 350)

Configuring Quality of Service

350

ProSafe M5300 Switch

• Mark IP DSCP - This lists the keywords for the known DSCP values from which one

can be selected. The list includes 'other' as an option for the remaining values.

• Simple Policy - Use this attribute to establish the traffic policing style for the specified

class. This command uses single data rate and burst size resulting in two outcomes

(conform and violate).

4. If you select the Simple Policy attribute, you can configure the following fields:

• Color Mode - This lists the color mode. The default is 'Color Blind'.

• Color Blind

• Color Aware

Color Aware mode requires the existence of one or more color classes that are valid

for use with this policy instance. A valid color class contains a single, non-excluded

match criterion for one of the following fields (provided the field does not conflict with

the classifier of the policy instance itself):

• CoS

• IP DSCP

• IP Precedence

• Committed Rate - This value is specified in the range 1 to 4294967295

kilobits-per-second (Kbps).

• Committed Burst Size - This value is specified in the range 1 to 128 KBytes. The

committed burst size is used to determine the amount of conforming traffic allowed.

• Conform Action - This lists the actions to be taken on conforming packets per the

policing metrics, from which one can be selected. The default is 'send'.

• Violate Action - This lists the actions to be taken on violating packets per the policing

metrics, from which one can be selected. The default is 'send'.

• For each of the above Action Selectors one of the following actions can be taken:

• Drop - These packets are immediately dropped.

• Mark IP DSCP - These packets are marked by DiffServ with the specified DSCP

value before being presented to the system forwarding element. This selection

requires that the DSCP value field be set.

• Mark CoS - These packets are marked by DiffServ with the specified CoS value

before being presented to the system forwarding element. This selection requires

that the Mark CoS value field be set.

• Send - These packets are presented unmodified by DiffServ to the system

forwarding element.

• Mark IP Precedence - These packets are marked by DiffServ with the specified IP

Precedence value before being presented to the system forwarding element. This

selection requires that the Mark IP Precedence value field be set.

5. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

6. If you change any of the settings on the page, click APPLY to send the updated

configuration to the switch. Configuration changes take effect immediately.

1 2 ... 345 346 347 348 349 350 351 352 353 354 355 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 350

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP