Netgear GS728TP User Manual Page 298

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 297
Routing
298
ProSafe M5300 Switch
10. Use Last Member Query Count to enter the number of queries to be sent on receiving a
leave group report. Valid values are from 1 to 20. The default value is 2.
11. Click APPLY to update the switch with the changes.
12. Click CANCEL to abandon the changes.
IGMP Routing Interface Statistics
To display the IGMP Routing Interface Statistics page, click Routing Multicast IGMP
Routing Interface Statistics.
Field Description
Interface The interface on which the IGMP is enabled.
IP Address The IP address of the selected interface.
Subnet Mask The subnet mask for the IP address of the selected interface.
Protocol State The operational state of IGMP on the selected interface.
Querier IP The address of the IGMP querier on the IP subnet to which the selected
interface is attached.
Querier Status Indicates whether the selected interface is in querier or non querier mode.
Querier Up Time The time in seconds since the IGMP interface querier was last changed.
Querier Expiry Time The time in seconds remaining before the other querier present timer
expires. If the local system is the querier, this will be zero.
Wrong Version Queries
Received
The number of queries that have been received on the selected interface
with an IGMP version that does not match the IGMP version configured for
the interface, over the lifetime of the entry. IGMP requires that all routers on
a LAN be configured to run the same version of IGMP. Therefore, a
configuration error is indicated if any queries are received with the wrong
version number.
Page view 297
1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 529 530

Comments to this Manuals

No comments