Netgear GS724TS-100NAS User Manual download pdf (Page 262)

262 | Appendix B: Configuration Examples

GS716Tv2 and GS724Tv3 Software Administration Manual

3. In the Guest VLAN field for ports e1–e8, enter 150 to assign these ports to the guest VLAN.

You can configure additional settings to control access to the network through the ports.

See Port Security Interface Configuration on page 179 for information about the settings.

4. Click Apply.

5. From the 802.1X Configuration screen, set the Port Based Authentication State and Guest

VLAN Mode to Enable, and then click Apply (See Port Security Configuration on

page 178).

This example uses the default values for the port authentication settings, but there are

several additional settings that you can configure. For example, the EAPOL Flood Mode

field allows you to enable the forwarding of EAPoL frames when 802.1X is disabled on

the device.

6. From the RADIUS Server Configuration screen, configure a RADIUS server with the

following settings:

• Server Address: 192.168.10.23

• Secret Configured: Yes

• Secret: secret123

• Active: Primary

For more information, see RADIUS Configuration on page 151.

7. Click Add.

8. From the Authentication List screen, configure the default List to use RADIUS as the first

authentication method (See Authentication List Configuration on page 159).

This example enables 802.1X-based port security on the GS716T or GS724T switch and

prompts the hosts connected on ports e1–e8 for an 802.1X-based authentication. The switch

passes the authentication information to the configured RADIUS server.

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 262