Netgear GS724TS-100NAS User Manual Page 253

  • Download
  • Add to my manuals
  • Print
  • Page
    / 275
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 252
Appendix B: Configuration Examples | 253
GS716Tv2 and GS724Tv3 Software Administration Manual
Destination MAC Mask: 00:00:00:00:FF:FF
Source MAC: 02:02:1A:BC:DE:EF
Source MAC Mask: 00:00:00:00:FF:FF
VLAN ID: 2
For more information about MAC ACL rules, see MAC Rules on page 186.
3. From the MAC Binding Configuration screen, assign the Sales_ACL to Ethernet ports 6, 7,
and 8, and then click Apply (See MAC Binding Configuration on page 188).
You can assign an optional sequence number to indicate the order of this access list
relative to other access lists if any are already assigned to this interface and direction.
4. The MAC Binding Table displays the interface and MAC ACL binding information (See MAC
Binding Table on page 189).
The ACL named Sales_ACL looks for Ethernet frames with destination and source MAC
addresses and MAC masks defined in the rule. Also, the frame must be tagged with VLAN ID
2, which is the Sales department VLAN. The CoS value of the frame must be 0, which is the
default value for Ethernet frames. Frames that match this criteria are permitted on interfaces
6, 7, and 8 and are assigned to the hardware egress queue 0, which is the default queue. All
other traffic is explicitly denied on these interfaces. To allow additional traffic to enter these
ports, you must add a new permit rule with the desired match criteria and bind the rule to
interfaces 6, 7, and 8.
Standard IP ACL Example Configuration
The following example shows how to create an IP-based ACL that prevents any IP traffic
from the Finance department from being allowed on the ports that are associated with other
Page view 252
1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 274 275

Comments to this Manuals

No comments