Netgear GS724TS-100NAS User Manual download pdf (Page 231)

Chapter 7: Maintenance | 231

GS716Tv2 and GS724Tv3 Software Administration Manual

while the other image stores a second copy. The device boots and runs from the

active image. If the active image is corrupt, the system automatically boots from the

non-active image. This is a safety feature for faults occurring during the boot upgrade

process.

• Text Configuration: A text-based configuration file enables you to edit a configured

text file (startup-config) offline as needed without having to translate the contents for

the switch to understand. The most common usage of text-based configuration is to

upload a working configuration from a device, edit it offline to personalize it for

another similar device (for example, change the device name, serial number, IP

address), and download it to that device.

• Boot Code: The boot code used to automatically boot the system.

• SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate File (PEM

Encoded).

• SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded).

• SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak

Encryption Parameter File (PEM Encoded).

• SSL DH Strong Encryption Parameter PEM File: SSL Diffie-Hellman Strong

Encryption Parameter File (PEM Encoded).

2. If you are downloading an GS716T or GS724T image (Code), select the image on the

switch to overwrite. This field is visible only when Code is selected as the File Type.

Note: It is recommended that you not overwrite the active image. The

system will display a warning that you are trying to overwrite the

active image.

3. From the Server Address Type filed, specify the format for the address you type in the

TFTP Server Address field

• IPv4. Indicates the TFTP server address is an IP address in dotted-decimal format.

• DNS. Indicates the TFTP server address is a hostname.

4. In the Server Address field, specify the IP address or hostname of the TFTP server. The

address you type must be in the format indicated by the TFTP Server Address Type.

5. In the Transfer File Path field, specify the path on the TFTP server where the file is located.

You may enter up to 32 characters. Include the backslash at the end of the path. A path

name with a space is not accepted. Leave this field blank to save the file to the root TFTP

directory.

6. In the Remote File Name field, specify the name of the file to download from the TFTP

server. You may enter up to 32 characters. A file name with a space is not accepted.

7. Select the Start File Transfer check box to initiate the file upload.

8. Click Apply to begin the file transfer.

The last row of the table displays information about the progress of the file transfer. The

page refreshes automatically until the file transfer completes or fails.

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 231