Netgear GS724TS-100NAS User Manual Page 223

  • Download
  • Add to my manuals
  • Print
  • Page
    / 275
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 222
Chapter 6: Monitoring the System | 223
GS716Tv2 and GS724Tv3 Software Administration Manual
To configure Port Mirroring:
1. Select the check box next to a port to configure it as a source port.
2. In the Destination Port field, specify the port to which port traffic is be copied. Use the e1,
e2,...format to specify the port. You can configure only one destination port on the system.
3. From the Session Mode menu, select the mode for port mirroring on the selected port:
Enable. Multiple Port Mirroring is active on the selected port.
Disable. Port mirroring is not active on the selected port, but the mirroring information
is retained.
4. Click Apply to apply the settings to the system. If the port is configured as a source port, the
Mirroring Port field value is Mirrored.
5. To delete a mirrored port, select the check box next to the mirrored port, and then click
Delete.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Page view 222
1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 274 275

Comments to this Manuals

No comments