Netgear GS724TS-100NAS User Manual Page 171

  • Download
  • Add to my manuals
  • Print
  • Page
    / 275
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 170
Chapter 5: Managing Device Security | 171
GS716Tv2 and GS724Tv3 Software Administration Manual
1. Select the check box next to the port to configure. You can also select multiple check
boxes to apply the same settings to the select ports, or select the check box in the
heading row to apply the same settings to all ports.
2. For the selected port(s), specify the following settings:
Port Control. Defines the port authorization state. The control mode is only set if the
link status of the port is link up. The possible field values are:
Auto: Automatically detects the mode of the interface.
Authorized: Places the interface into an authorized state without being
authenticated. The interface sends and receives normal traffic without client
port-based authentication.
Unauthorized: Denies the selected interface system access by moving the
interface into unauthorized state. The switch cannot provide authentication
services to the client through the interface.
Guest VLAN ID. This field allows the user to configure the Guest VLAN ID on the
interface. The valid range is 0–4093.The default value is 0. Enter 0 to reset the Guest
VLAN ID on the interface.
Guest VLAN Period. This input field allows the user to enter the Guest VLAN period
for the selected port. The Guest VLAN period is the value, in seconds, of the timer
used by the Guest VLAN Authentication. The Guest VLAN timeout must be a value in
the range of 1–300. The default value is 90.
Periodic Reauthentication. Use this field to enable or disable reauthentication of the
supplicant for the specified port. Select Enable and Disable. If the value is Enable,
reauthentication will occur. Otherwise, reauthentication will not be allowed. The
default value is Disable. Changing the selection will not change the configuration until
the Apply button is pressed.
Reauthentication Period. Indicates the time span in which the selected port is
reauthenticated. The field value is in seconds. The range is 1–65535, and the field
default is 3600 seconds.
Quiet Period. Defines the amount of time that the switch remains in the quiet state
following a failed authentication exchange. The possible field range is 0–65535. The
field value is in seconds. The field default is 60 seconds.
Resending EAP. This input field allows you to configure the transmit period for the
selected port. The transmit period is the value, in seconds, of the timer used by the
authenticator state machine on the specified port to determine when to send an
EAPOL EAP Request/Identify frame to the supplicant. The transmit period must be a
number in the range of 1–65535. The default value is 30. Changing the value will not
change the configuration until you click the Apply button.
Max EAP Requests. This input field allows you to enter the maximum requests for
the selected port. The maximum requests value is the maximum number of times the
authenticator state machine on this port will retransmit an EAPOL EAP
Request/Identity before timing out the supplicant. The maximum requests value must
be in the range of 1–10. The default value is 2. Changing the value will not change the
configuration until you click the Apply button.
Page view 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 274 275

Comments to this Manuals

No comments