Netgear GS724TS-100NAS User Manual download pdf (Page 167)

Chapter 5: Managing Device Security | 167

GS716Tv2 and GS724Tv3 Software Administration Manual

To configure access profile rules:

1. To add an access profile rule, configure the following settings and click Add.

• Rule Type: Specify whether the rule permits or denies access to the GS716T or

GS724T management interface.

• Select Permit to allow access to the management interface for traffic that meets

the criteria you configure for the rule. Any traffic that does not meet the rules is

denied.

• Select Deny to prohibit access to the management interface for traffic that meets

the criteria you configure for the rule. Any traffic that does not meet the rules is

allowed access to the switch. Unlike MAC ACLs and IP ACLs, there is no implied

deny all rule at the end of the rule list.

• Service Type. Select the type of service to allow or prohibit from accessing the switch

management interface:

• SNMP

• HTTP

• HTTPS

• Source IP Address. Specify the IP Address of the client originating the management

traffic.

• Mask. Specify the subnet mask associated with the IP address. The subnet mask is a

standard subnet mask, and not an inverse (wildcard) mask that you use with IP ACLs.

• Priority. Configure priority to the rule. The rules are validated against the incoming

management request in the ascending order of their priorities. If a rule matches,

action is performed and subsequent rules below are ignored. For example, if a

Source IP 10.10.10.10 is configured with priority 1 to permit, and Source IP

10.10.10.10 is configured with priority 2 to Deny, then access is permitted if the profile

is active, and the second rule is ignored.

2. To modify an access rule, select the check box next to the Rule Type, update the desired

settings, and click Apply

3. To delete an access rule, select the check box next to the Rule Type, and click Delete.

4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 167