Netgear GS724TS-100NAS User Manual download pdf (Page 139)

Chapter 4: Configuring Quality of Service | 139

GS716Tv2 and GS724Tv3 Software Administration Manual

2. Define the criteria to associate with a DiffServ class:

• Reference Class. Selects a class to start referencing for criteria. A specified class

can reference at most one other class of the same type.

• Class of Service. Select the field and enter a class of service 802.1p user priority

value to be matched for the packets. The valid range is 0–7.

• VLAN. Select the field and enter a VLAN ID to be matched for packets. The VLAN ID

range is 1–4093.

• Protocol Type. Requires a packet’s layer 4 protocol to match the protocol you select.

If you select Other, enter a protocol number in the field that appears. The valid range

is 0–255.

• Source IP Address. Requires a packet’s source port IP address to match the

address listed here. In the IP Address field, enter a valid source IP address in dotted

decimal format.

• Source Mask. Enter a valid subnet mask to determine which bits in the IP address

are significant. Note that this is not a wildcard mask.

• Source L4 Port. Requires a packet’s TCP/UDP source port to match the port you

select. Select the desired L4 keyword from the list on which the rule can be based. If

you select Other, the screen refreshes and a Port ID field appears. Enter a

user-defined Port ID by which packets are matched to the rule.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 139