Netgear GS724TS-100NAS User Manual Page 130

  • Download
  • Add to my manuals
  • Print
  • Page
    / 275
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 129
130 | Chapter 4: Configuring Quality of Service
GS716Tv2 and GS724Tv3 Software Administration Manual
To configure CoS settings for an interface:
1. To configure CoS settings for a physical port, click PORTS.
2. To configure CoS settings for a Link Aggregation Group (LAG), click LAGS.
3. To configure CoS settings for both physical ports and LAGs, click ALL.
4. Select the check box next to the port or LAG to configure. You can select multiple ports and
LAGs to apply the same setting to the selected interfaces.
5. From the Interface Trust Mode field, specify whether or not the selected interface(s) trust a
particular packet marking when the packet enters the port.
Untrusted. Do not trust any CoS packet marking at ingress.
802.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The
QoS setting lets you map each of the eight priority levels to one of four internal
hardware priority queues: High, Normal, Low, and Lowest.
DSCP. The six most significant bits of the DiffServ field are called the Differentiated
Services Code Point (DSCP) bits.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
7. If you make changes to the page, click Apply to apply the changes to the system.
Page view 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 274 275

Comments to this Manuals

No comments