Netgear MP101 User's Guide download pdf (Page 38)

User’s Manual for the MP101 Digital Music Player

A-2 Troubleshooting

4. The message Searching for Servers should be displayed. You will then be able to choose

which server to use from the list of servers found. If only one server is found, the MP101 will

automatically connect to it. If you get the message No Servers Found, or if the MP101 cannot

find the correct server, see Connecting to the Server on page A-3. If the MP101 cannot find

your RHAPSODY server, see Connecting to the RHAPSODY Server on page A-4.

5. Once a server is selected, the Home Menu should be displayed. Navigate through the Browse

Music menus and select a song. If the song does not play, see Playing Music on page A-4.

Physical Connectivity

Ethernet Link

Because the MP101 incorporates Auto Uplink technology (also called Auto MDI/MDI-X), it is

capable of automatically sensing the polarity of the Ethernet connection. You can therefore

connect using either a standard or crossover Ethernet cable. The Ethernet port of your MP101 will

automatically configure itself properly.

If connecting to your network using Ethernet the link LED on the back of your MP101 and on your

hub or router should both be on. If not, try the following:

• Make sure that the Ethernet cable connections are secure at the router and at the hub or

workstation.

• Make sure that power is turned on to the connected hub or workstation.

Wireless Link

If you are unable to detect any wireless networks, try the following:

• Your wireless access point may be too far from the MP101. It may be necessary to move either

the AP and MP101 closer together.

• If your access point is configured to disable broadcast of SSID, the MP101 will not be able to

detect it. You will need to manually configure your wireless settings as described in “Manual

Wireless Configuration” on page 3-3.

• The MP101 cannot connect to the wireless network while it is connected to the Ethernet

network. Disconnect your Ethernet cable.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

No comments

Netgear MP101 User's Guide Page 38