Netgear WN2000RPTv2 Installation Guide download pdf (Page 6)

Connecting the Extender to an Existing

Wi-Fi Network

To extend the range of your Wi-Fi network, you will need to connect

the Extender to your existing Wi-Fi network. You have two options to

connect the Extender to your network.

Option 1: Connecting with WPS (Wi-Fi Protected Setup)

WPS lets you easily join a secure Wi-Fi network without typing

the network name and password. The WPS button is a physical

button on the Wi-Fi router, gateway, or access point.

If your router supports WPS (Wi-Fi Protected Setup ),

NETGEAR recommends that you use Option 1; otherwise, go to

Option 2.

Tip: WPS does not support WEP network security.

If you are using WEP security, use Option 2

to connect.

Option 2: Connecting without WPS, using web browser setup guide

The web browser setup guide walks you through the necessary

steps to connect your Extender to an existing Wi-Fi network.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Netgear WN2000RPTv2 Installation Guide Page 6