Netgear Modem FVS318G User Manual Page 94

  • Download
  • Add to my manuals
  • Print
  • Page
    / 222
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 93
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
4-38 Firewall Protection and Content Filtering
v1.1, August 2010
Without port triggering, this response would be treated as a new connection request rather than a
response. As such, it would be handled in accordance with the port forwarding rules.
Note these restrictions with port triggering:
Only one PC can use a port triggering application at any time.
After a PC has finished using a port triggering application, there is a time-out period before the
application can be used by another PC. This is required because the VPN firewall cannot
detect when the application has terminated.
To add a port triggering Rule:
1. Select Security from the main menu and Port Triggering from the submenu. The Port
Triggering screen displays.
2. Enter a user-defined name for this rule in the Name field.
3. From the Enable pull-down menu, indicate if the rule is enabled or disabled.
4. From the Protocol pull-down menu, select either the TCP or UDP protocol.
5. In the Outgoing (Trigger) Port Range fields:
Note: For additional ways of allowing inbound traffic, see “Inbound Rules (Port
Forwarding)” on page 4-5.
Figure 4-24
Page view 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 221 222

Comments to this Manuals

No comments