Netgear Modem FVS318G User Manual Page 81

  • Download
  • Add to my manuals
  • Print
  • Page
    / 222
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 80
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Firewall Protection and Content Filtering 4-25
v1.1, August 2010
To define a new service, first you must determine which port number or range of numbers is used
by the application. This information can usually be determined by contacting the publisher of the
application or from user groups of newsgroups. When you have the port number information, you
can enter it on the Services screen.
To add a customized service:
1. Select Security from the main menu and Services from the submenu. The Services screen
displays.
2. In the Add Custom Services section of the screen, specify a new service:
a. Enter a descriptive name for the service (this is for your convenience).
b. Select the Layer 3 Protocol that the service uses as its transport protocol. It can be TCP,
UDP or ICMP.
c. Enter the first TCP or UDP port of the range that the service uses. If the service uses only
one port, then the Start Port and the Finish Port will be the same.
d. Enter the last port of the range that the service uses. If the service only uses a single port
number, enter the same number in both fields.
3. Click Add. The new custom service will be added to the Custom Services Table.
Figure 4-16
Page view 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 221 222

Comments to this Manuals

No comments