Netgear Modem FVS318G User Manual Page 175

  • Download
  • Add to my manuals
  • Print
  • Page
    / 222
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 174
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
VPN Firewall and Network Management 6-21
v1.1, August 2010
After downloading an upgrade file, you may need to unzip (uncompress) it before upgrading
the VPN firewall. If Release Notes are included in the download, read them before continuing.
4. Select Administration from the main menu and Settings Backup & Upgrade from the
submenu. The Settings Backup and Firmware Upgrade screen displays.
5. Click Browse in the Router Upgrade section.
6. Locate the downloaded file and click Upload. This will start the software upgrade to your
VPN firewall. The software upgrade process might take some time. At the conclusion of the
upgrade, your VPN firewall will reboot.
7. After the VPN firewall has rebooted, select Monitoring to display the Router Status screen,
and confirm the new firmware version to verify that your VPN firewall now has the new
software installed.
Configuring Date and Time Service
Date, time and NTP server designations can be configured on the Time Zone screen. Network
Time Protocol (NTP) is a protocol that is used to synchronize computer clock times in a network
of computers.
To set time, date, and NTP servers:
1. Select Administration from the main menu and Time Zone from the submenu. The Time
Zone screen displays (see Figure 6-9 on page 6-22).
Warning: After you have clicked Upload, do not try to go online, turn off the VPN
firewall, shutdown the computer or do anything else to the VPN firewall
until the VPN firewall finishes the upgrade! When the Test light turns off,
wait a few more seconds before doing anything.
Note: In some cases, such as a major upgrade, it may be necessary to erase the
configuration and manually reconfigure your VPN firewall after upgrading it.
Refer to the Release Notes included with the software to find out if this is
required.
Page view 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 221 222

Comments to this Manuals

No comments