Netgear Modem FVS318G User Manual Page 148

  • Download
  • Add to my manuals
  • Print
  • Page
    / 222
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 147
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
5-50 Virtual Private Networking
v1.1, August 2010
Configuring the ProSafe VPN Client for ModeConfig
From a client PC running NETGEAR ProSafe VPN Client software, configure the remote VPN
client connection.
To configure the client PC:
1. Right-click the VPN client icon in the Windows toolbar. In the upper left of the Policy Editor
window, click the New Policy editor icon.
Enter the following information:
a. Give the connection a descriptive name such as “modecfg_test” (this name will only be
used internally).
b. From the ID Type pull-down menu, select IP Subnet.
c. Enter the IP subnet and mask of the VPN firewall (this is the LAN network IP address of
the gateway).
d. Check the Connect using radio button and select Secure Gateway Tunnel from the pull-
down menu.
e. From the ID Type pull-down menu, select Domain name and enter the FQDN of the VPN
firewall; in this example it is “local_id.com”.
f. Select Gateway IP Address from the second pull-down menu and enter the WAN IP
address of the VPN firewall; in this example it is “172.21.4.1”.
Figure 5-35
Page view 147
1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 221 222

Comments to this Manuals

No comments