Netgear Modem DGN2200V3 User Manual download pdf (Page 94)

Advanced Settings

N300 Wireless ADSL2+ Modem Router DGN2200v3

Select Advanced > Wireless Repeating Function to display the following screen:

• Enable Wireless Repeating Function. Select this check box if you want to use the

wireless repeating function.

• Disab

le Wireless Client Association. If your modem router is the repeater, selecting

this check box means that wireless clients cannot associate with it. Only LAN client

associations are allowed.

- If you are

setting up a point-to-point bridge, select this check box.

- If you wan

t all client traffic to go through the other access point (repeater with wireless

client association), leave this check box cleared.

• W

ireless MAC of this router. This field displays the MAC address for your modem router

for your reference. You will need to enter this MAC address in the corresponding Wireless

Repeating Function screen of the other access point you are using.

• W

ireless Repeater. If your modem router is the repeater, select this check box.

• Repe

ater IP Address. If your modem router is the repeater, enter the IP address of the

other access point.

• Base

Station MAC Address. If your modem router is the repeater, enter the MAC

address for the access point that is the base station.

• W

ireless Base Station. If your modem router is the base station, select this check box.

• Disabl

e Wireless Client Association. If your modem router is the base station, selecting

this check box means that wireless clients cannot associate with it. Only LAN client

associations are allowed.

• Repe

ater MAC Address (1 through 4). If your modem router is the base station, it can

act as the “parent” of up to 4 other access points. Enter the MAC addresses of the other

access points in these fields.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 119 120

No comments

Netgear Modem DGN2200V3 User Manual Page 94