Netgear Modem DGN2200V3 User Manual download pdf (Page 49)

Security Settings

N300 Wireless ADSL2+ Modem Router DGN2200v3

Set Up Port Triggering

Port triggering is a dynamic extension of port forwarding that is useful in these cases:

• More than one local computer needs port forwarding for the same application (but not

simultaneously).

• An application needs to open incoming ports that are different from the outgoing port.

When port triggering is enabled, the router monitors outbound traffic looking for a specified

outbound “trigger” port. When the router detects outbound traffic on that port, it remembers

the IP address of the local computer that sent the data. The router then temporarily opens the

specified incoming port or ports, and forwards incoming traffic on the triggered ports to the

triggering computer.

While port forwarding creates a static mapping of a port number or range to a single local

computer, port triggering can dynamically open ports to any computer that needs them and

can close the ports when they are no longer needed.

Note: If you use applications such as multiplayer gaming, peer-to-peer

connections, real-time communications such as instant messaging,

or remote assistance (a feature in Windows XP), you should also

enable Universal Plug and Play (UPnP).

To configure port triggering, you need to know which inbound ports the application needs.

Also, you need to know the number of the outbound port that will trigger the opening of the

inbound ports. You can usually determine this information by contacting the publisher of the

application or user groups or news groups.

 To enable port triggering:

1. Select Advanced > Port Forwarding/Port Triggering to display the Port

Forwarding/Port Triggering screen.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 119 120

No comments

Netgear Modem DGN2200V3 User Manual Page 49