Netgear Modem DGN2200V3 User Manual download pdf (Page 34)

Wireless Settings

N300 Wireless ADSL2+ Modem Router DGN2200v3

Consider Every Device on Your Network

Before you begin, check the following:

• Every wire

less computer has to be able to obtain an IP address by DHCP from the

modem router as described in Use Standard TCP/IP Properties for DHCP on

page 18.

• Each co

mputer or wireless adapter in your network must have the same SSID and

wireless mode (bandwidth/data rate) as the modem router. Check that the wireless

adapter on each computer can support the mode and security option you want to use.

• The

security option on each wireless device in the network must match the modem router.

For example, if you select a security option that requires a passphrase, be sure to use

same passphrase for each wireless computer in the network.

View or Change Wireless Settings

Your preset modem router comes set up with a unique wireless network name (SSID) and

network password. This information is printed on the label for your modem router. You view or

change these settings in the Wireless Settings screen. You can also use this screen to set up

guest wireless networks.

 To view or change wireless settings:

1. Select Setup > W

ireless Settings to display the following screen.

2. Make any changes that are needed, and click Apply when done to save your settings.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 119 120

No comments

Netgear Modem DGN2200V3 User Manual Page 34