Netgear Modem DGN2200V3 User Manual download pdf (Page 33)

Wireless Settings

N300 Wireless ADSL2+ Modem Router DGN2200v3

2. Click Next. The following screen lets you select the method for adding the WPS client.

WPS Push button method

3. Select either Push Button or PIN Number. With either method, the modem router tries to

communicate with the computer or wireless device, set the wireless security for wireless

device, and allow it to join the wireless network.

The PIN method displays this screen so you can en

ter the client security PIN number:

WPS PIN method

While the modem router attempts to connect, the WPS LED on the front of the modem

router blinks green. When the modem router establishes a WPS connection, the LED is

solid green and the modem router WPS screen displays a confirmation message.

4. Repe

at to add another WPS client to your network.

Wireless Settings Screen

The Wireless Settings screen lets you view or change the wireless network settings. Note

that your preset modem router has a unique network name and password, located on the

product label. NETGEAR recommends that you use these settings. If you decide to change

them, note the new settings and save them in a secure location.

Note: If you use a wireless computer to change the wireless network

name (SSID) or security options, you are disconnected when you

click Apply. To avoid this problem, use a computer with a wired

connection to access the modem router.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

No comments

Netgear Modem DGN2200V3 User Manual Page 33