Netgear Modem DGN2200V3 User Manual download pdf (Page 32)

Wireless Settings

N300 Wireless ADSL2+ Modem Router DGN2200v3

Manual Method

 To join the wireless network:

1. Op

en the software that manages your wireless connections on the wireless device

(laptop computer, gaming device, iPhone) that you want to connect to your modem

router. This software scans for all wireless networks in your area.

2. Loo

k for your network and select it. If you did not change the name of your network during

the setup process, look for the default Wi-Fi network name (SSID) and select it. The default

Wi-Fi network name (SSID) is located on the product label on the bottom of the modem

router.

3. Enter

the modem router passphrase and click Connect. The default modem router

passphrase is located on the product label on the bottom of the modem router.

4. Repeat

steps 1–3 to add other wireless devices.

Wi-Fi Protected Setup (WPS) Method

Wi-Fi Protected Setup (WPS) is a standard that lets you easily join a secure wireless network

with WPA or WPA2 wireless security. The modem router automatically sets security for each

computer or device that uses WPS to join the wireless network. To use WPS, make sure that

your wireless devices are Wi-Fi certified and support WPS. NETGEAR products that use

WPS call it Push 'N' Connect.

Note: If the wireless network name (SSID) changes each time you add a

WPS client, the Keep Existing Wireless Settings check box on the

Advanced Wireless Settings screen has been cleared. See

WPS

Settings on page 86 for more information about this setting.

You can use a WPS button or the modem router interface method to add wireless computers

and d

evices to your wireless network.

 To join the wireless network using a WPS button:

1. Press the

WPS button on the modem router front panel.

2. Wit

hin 2 minutes, press the WPS button on your wireless computer or device, or follow the

WPS instructions that came with the computer. The device is now connected to your modem

router.

3. Repeat

steps 1–2 to add other WPS wireless computers or devices.

 To use the modem router Interface to add a client:

1. Select Add WPS Cli

ent at the top of the modem router menus.

1. For a list of other Wi-Fi-certified products available from NETGEAR, go to http://www.wi-fi.org.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 119 120

Comments to this Manuals

No comments

Netgear Modem DGN2200V3 User Manual Page 32

Comments to this Manuals

Related products and manuals for Routers Netgear Modem DGN2200V3