Netgear GS524T User Manual download pdf (Page 25)

connector pin assignments B-1

APPENDIX B: CONNECTOR PIN ASSIGNMENTS

This appendix provides information about the RJ-45 plug and the RJ-45 connector

used for the NETGEAR Model GS524T Copper Gigabit Switch.

RJ-45 Plug and RJ-45 Connector

It is important that all 1000 BASE-T certified Category 5 or Category 5e cabling

use RJ-45 plugs.The RJ-45 plug accepts 4-pair UTP or shielded twisted

pair (STP) 100 ohm cable and connects into the RJ-45 connector.

The RJ-45 connector is used to connect stations,hubs, and switches through UTP

cable;it supports 10 Mbps,100 Mbps,or 1000 Mbps data transmission.

The RJ-45 plug and RJ-45 connector are both illustrated in Figure B-1.

Key:

1 to 8 = pin numbers

Figure B-1. RJ-45 Plug and RJ-45 Connector with Built-in LEDs

12345678

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

No comments

Netgear GS524T User Manual Page 25