Netgear 208-10026-01 User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 30
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
ADSL Modem Router Setup Manual
Troubleshooting 2-7
v1.1, 2006-2
If you cannot connect after several minutes, you may be using an incorrect Service Name, User
Name or Password. There also may be a provisioning problem with your ISP.
Troubleshooting Internet Browsing
If your ADSL modem router can obtain an IP address but your computer is unable to load any Web
pages from the Internet:
Your computer may not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
servers for your use. If you entered a DNS address during the ADSL modem router’s
configuration, reboot your computer and verify the DNS address as described in “Preparing a
Computer for Network Access”. Alternatively, you can configure your computer manually
with DNS addresses, as explained in your operating system documentation.
Your computer may not have the wireless ADSL modem router configured as its TCP/IP
default gateway.
If your computer obtains its information from the ADSL modem router by DHCP, reboot the
computer and verify the ADSL modem router address as described in “Preparing a Computer
for Network Access”.
Troubleshooting a TCP/IP Network Using the Ping Utility
Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP
network is made very easy by using the ping utility in your computer.
Testing the LAN Path to Your Router
You can ping the router from your computer to verify that the LAN path to your router is set up
correctly.
To ping the router from a PC running Windows 95 or later:
Note: Unless you connect manually, the ADSL modem router will not authenticate using
PPPoE or PPPoA until data is transmitted to the network.
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments