Netgear EVA9150 Owner's Manual download pdf (Page 18)

Universal Remote User Manual

3-10 Changing the Volume Lock

v1.0, March 2009

3. Enter 9 9 3, and then press VOL -. The LED blinks four times. Volume is independently

controlled for the selected device.

4. Repeat these to unlock the volume controls for additional devices.

Restore Independent Volume Control

(Global Unlock)

To set the remote to change the volume for only a selected device even if another device mode is

selected, do the following:

1. Press and hold

SET until the red LED blinks twice.

2. Enter 9 9 3, and then press VOL+. The LED blinks four times. Volume is independently

controlled for all programmed devices.

Note: To unlock the volume controls for all devices, complete the instructions in

“Restore Independent Volume Control (Global Unlock) ” on page 3-10.

Note: This option is the default factory setting. Complete these instructions only if you

previously changed the volume control settings.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 49 50

No comments

Netgear EVA9150 Owner's Manual Page 18