Netgear EVA9150 Owner's Manual download pdf (Page 15)

Universal Remote User Manual

Programming the NETGEAR Universal Remote 2-7

v1.0, March 2009

Searching for a Device Code

If your device does not respond to the remote after trying all codes listed for your brand, or if your

brand is not listed, try searching for your code:

1. Press a device button once.

2. Press and hold

SET until the red LED blinks twice.

3. Enter 9 9 1, then the device group number (see the following table). The LED blinks twice.

4. Aim the remote at the device, and press Power. The remote sends codes from its library to the

selected device, starting with the most popular code first. If the device responds, go to step 7.

5. If the device does not respond, press CH+. The remote will try the next code. Continue until

the device responds.

6. To search for other device codes, repeat step 1 to step 5.

7. Press

SET. This will save the latest code sampled.

Discovering a Device Code

If you set up the NETGEAR Universal Remote using the procedure in “Searching for a Device

Code” on page 2-7, you can discover the four-digit code used to operate your equipment.

For example, to find out the code assigned to your TV:

1. Press

TV once.

2. Press and hold

SET until the red LED blinks twice.

Table 2-2. Device Group Codes

Code Device Group

0 Cable (cable converters, video accessories, satellite

receivers)

1 TV (TVs)

2 VCR (VCRs, DVD players)

3 Audio (audio amplifiers, audio tuners, CD players)

Tip: Press CH- to try the previous code.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 49 50

No comments

Netgear EVA9150 Owner's Manual Page 15