Netgear EVA9150 Owner's Manual download pdf (Page 11)

Universal Remote User Manual

Welcome 1-3

v1.0, March 2009

User Manual Contents

To program your NETGEAR Universal Remote, refer to the following sections:

• “Installing Batteries ” on page 1-4.

Batteries must be installed before you use the remote.

• Chapter 2, “Programming the NETGEAR Universal Remote.

Follow these instructions to configure the device buttons to control a TV, VCR, DVD player,

cable or satellite receivers, amplifier or tuner, or other device.

• Chapter 3, “Changing the Volume Lock.

By default, the volume buttons on your universal remote control only the selected device.

Follow the instructions in this section to configure the volume buttons to always control a

specific device, such as a TV, regardless of the selected device mode.

• Chapter 4, “Moving Button Functions.

You can copy a button’s function to another button or device mode. For example, you can copy

the Repeat button function to another button, or enable the DVD controls in the TV mode.

Figure 1-2

Table 1-1. Device Buttons

Button Description

Press TV to control another home entertainment device, such

as a TV, that has been programmed on the remote.

Press DVD to control another home entertainment device,

such as a DVD player, that has been programmed on the

remote.

Press DE to control a Digital Entertainer Elite.

Press AUX to control another home entertainment device,

such as a cable or satellite receiver, amplifier, tuner, or other

auxiliary device, that has been programmed on the remote.

Device buttons

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

No comments

Netgear EVA9150 Owner's Manual Page 11