Netgear PS100 User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
NetGear Print Server Manual
70
Add remote printer(s)
See adding remote printers in table Sample Commands for Using LPD on
System V
Start lpc print mechanism lpc start printer_name
Printing Using LPD
For LPD printing instructions, refer to your UNIX manual. An example command that is used for a
BSD UNIX system is:
lpr -P printer_name filename
The definitions used are:
printer_name is the name of the print queue defined on the UNIX host.
filename is the name of the file you want to print.
An example command with parameters is:
lpr -P Marketing /etc/hosts
In the above example, the /etc/hosts file is sent to the Marketing printer queue. It is then sent to the
logical printer associated with this queue.
Printing Using FTP
Using FTP to print lets you send print jobs to the printers directly. Because there is no spooling, if the
printer is not ready, the print job is terminated immediately. The advantage of FTP is that no host
configuration is required.
To print using FTP, use the command lines:
#ftp Name
ftp>put FileName Ln
The definitions used are:
Name is the name of the print server.
FileName is the file you want to print.
Ln is the logical printer you want to print to.
Printing Using DSI
Logical printers must be configured on the print server. Even if you are using the PS100 series Print
Sever that normally supports up to eight logical printers, using DSI to print limits the support to three
logical printers.
Socket numbers are defined as listed in table Socket Number Definitions.
Socket Number Definitions
Logical Printer Number
Socket Number
1 4010
2 4020
3 4030
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 141 142

Comments to this Manuals

No comments