Netgear PS100 User Manual Page 103

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 102
NetGear Print Server Manual
94
8. Select your print server in the print server list.
9. Select Print Server Configuration, and then select File Server To Be Serviced.
10. Insert the names of the other file servers to be serviced by your print server.
11. Press [Esc] until you exit PCONSOLE.
12. Execute the PSCONFIG program while you are logged in to the file server.
13. Select the NETGEAR print server and configure it to attach to the designated master Bindery file
server.
This step is not necessary if the print server has previously been configured.
14. Reset your print server by turning the power off and then on again.
You can also reset the print server by executing the PSCONFIG program, selecting the preferred print
server, and then selecting Reset Device from the Available Options window.
Your print server is now ready to service more than one Bindery file server.
Attaching to More Than One NetWare Print Server
If your print server is configured as a NetWare remote printer and you want each port of your print
server to attach to a different NetWare print server, perform the following procedure.
To attach each port of your print server to a different NetWare print server:
1. Use PCONSOLE to create and assign the required printers and queues as outlined in “Setting
RPRINTER Mode in NetWare 3.x (Bindery Mode)” or “Setting RPRINTER Mode in a NetWare 4.x
NDS Mode Network”.
When in NetWare RPRINTER mode, each printer port on the Model PS110/PS113 print server can be
configured to service different NetWare print servers residing on different file servers.
2. Execute PSCONFIG.
3. Select the print server.
4. Select Change Configuration.
5. Select NetWare Configuration.
6. Verify that the Operation Mode field shows RP for RPRINTER mode.
7. Enter the correct NetWare print server names in each one of the Novell PSERVER fields.
8. Return to the Select Configuration Item window.
9. Select Execute Change.
Your print server is now configured in NetWare RPRINTER mode and ready to service multiple
NetWare print servers.
Page view 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 141 142

Comments to this Manuals

No comments