Netgear Printer PS101 User Manual download pdf (Page 9)

To configure computers running Windows NT,2000,and XP:

1. Click Start, point to Programs> NETGEAR Print Server and click NETGEAR Add Printer

Wizard.

2. Read, follow the instructions, and click OK in the Setup

message window.

3. In the list, select the print server port with the printer

you want to add to this computer and click Add. When

you see the AddPort screen, write down the port name

(such as PSFF0091_P1).

Printer port name:_____________________________.

4. Scroll down in Add Printer Wizard screen. Select the Print

Server port with port name as written above.

Click Next.

Note: Do NOT select the default port “LPT1.”

5. Select the printer manufacturer on the left and

the model on the right

or, if you need to install the printer driver, click

Have Disk and follow the instructions.

6. If you have installed the printer driver for this

printer, you will be asked to keep the existing

driver or replace it. Select either one and click

Next. Follow the instruction on screen if any.

7. Type a name for this printer and determine whether you want this as the default printer.

Click Next.

8. Select No when asked about sharing the printer and click Next.

Note: The print server will perform this function.

9. Select Yes when asked about printing a test page and click Next.

10. Click Finish.

If you cannot print the test page, go to Troubleshooting on page 9.

If you successfully printed the test page, you can configure other computers to access this

printer by repeating procedure 4 on each computer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Netgear Printer PS101 User Manual Page 9