Netgear WAG511 User's Guide Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual
2-7
v4.0, March 2007
5. Verify wireless connectivity between your peer devices with the Ping program.
a. On the Windows taskbar click the Start button, and then click Run.
b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type
ping -t 192.168.0.1
and then click OK.
c. This will cause a continuous ping to be sent to the device with the 192.168.0.1 static IP
address. The ping response should change to “reply.”
At this point the connection is established.
Starting a Computer-to-Computer (Ad Hoc) Network Connection
To start a computer-to-computer network connection:
1. On the Settings tab page, enter the Network Name (SSID) and then select Computer-to-
Computer (Ad Hoc) as the network type.
Figure 2-5
Figure 2-6
Note: If you cannot connect, see “Connecting to Wireless Networks and the
Internet” in Chapter 1. Also, for problems with accessing network
resources, the Windows Client and File and Print Sharing software might
not be installed and configured properly on your computers. See the link
to “Internet Networking and TCP/IP Addressing” on page B-1.
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

Comments to this Manuals

No comments