Netgear WPN511 User Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
NETGEAR RangeMax Wireless PC Card WPN511 User Manual
4-2
v3.0, January 2007
Throughput is only 54 Mbps. The WPN511 Wireless PC Card can operate at faster speeds.
You are probably connecting to a standard 802.11g network.
See Chapter 3, “Wireless Network Performance” for help in
understanding how to get the best performance from your
WPN511 Wireless PC Card.
The Smart Wizard keeps asking me to save
settings.
If you change the settings the Smart Wizard offers you the
chance to save the changes. To avoid this prompt, simply click
Apply before you close the Smart Wizard.
Two WPN511 icons are in the system tray. You have an older software version installed on your system
and it needs to be removed. See “Removing the WPN511
Software” in Chapter 1 or “Upgrading the WPN511 Software”
in Chapter 1.
I can connect to the access point, but not
the other computers on the network or to
the Internet.
This could be a physical layer problem or a network
configuration problem.
1. Check to make sure that the access point is physically
connected to the Ethernet network.
2. Make sure that the IP addresses and the Windows
networking parameters are all configured correctly. See
the link to “Internet Networking and TCP/IP Addressing” in
Appendix B
.
3. Restart the cable or DSL modem, router, access point, and
computer.
Viewing the IP address. To view the WPN511 Wireless PC Card IP address, click the
WPN511 icon to open the Smart Wizard. Then check the IP
address in the About page.
No IP address is assigned to the WPN511
Wireless PC Card.
This may occur if you upgraded your WPN511 Wireless PC
Card software and did not reboot your system.
Either restart your computer, or connect to a different access
point.
It does not usually help to shut down the Smart Wizard or
disable/enable the card.
Table 4-1. Troubleshooting Tips (continued)
Problem Action
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments