Netgear WPN511 User Manual download pdf (Page 36)

NETGEAR RangeMax Wireless PC Card WPN511 User Manual

2-14

v3.0, January 2007

3. Select the WEP encryption strength you will use:

• 64-bit WEP data encryption

• 128-bit WEP data encryption

4. Select Create with Passphrase and enter the passphrase. The configuration utility will

automatically generate the WEP keys.

If the passphrase method is not available in the other devices, you must manually enter the

keys to match exactly what is in the access point and other 802.11b wireless devices.

5. Save your settings in a Profile.

a. Click the Save Profile button. All the configuration settings are saved in this profile.

b. Click Apply.

c. Click Close to exit the configuration utility.

Setting up WPA2-PSK Security

Follow the steps below to configure WPA2-PSK Security.

1. Run the Smart Wizard.

a. Make sure the NETGEAR software is installed and the WPN511 Wireless PC Card is fully

inserted in the Cardbus slot in your computer.

Note: Larger encryption keys require more processing and may slow the

communications response times.

Note: The characters are case sensitive. Be sure to use the same passphrase for all the

wireless devices in the network.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

No comments

Netgear WPN511 User Manual Page 36