Netgear WPN511 User Manual download pdf (Page 31)

NETGEAR RangeMax Wireless PC Card WPN511 User Manual

2-9

v3.0, January 2007

5. Verify wireless connectivity between your peer devices.

Verify connectivity by using the Ping program:

a. On the Windows taskbar click the Start button, and then click Run.

b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type

ping -t 192.168.0.1 and then click OK.

c. This will cause a continuous ping to be sent to the device with the 192.168.0.1 static IP

address. The ping response should change to “reply.”

At this point the connection is established.

Figure 2-6

Figure 2-7

Note: If you cannot connect, see “Connecting to Wireless Networks and the Internet”

in Chapter 1. Also, for problems with accessing network resources, the

Windows Client and File and Print Sharing software might not be installed and

configured properly on your computers. See the link to “Internet Networking

and TCP/IP Addressing” on page B-1.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

No comments

Netgear WPN511 User Manual Page 31