Netgear WPN511 User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
NETGEAR RangeMax Wireless PC Card WPN511 User Manual
2-6
v3.0, January 2007
Setting up a Profile to Connect to an Access Point or Router
Follow these instructions to set up the WPN511 Wireless PC Card to connect to a wireless access
point or router.
1. Use the icon to open the Smart Wizard. The Settings page opens.
2. Enter the network settings.
a. In the Network Type section, be sure that Access Point (Infrastructure) is selected.
b. In the Profile box, type the name of the profile.
c. In the Network Name (SSID) field select a network or enter the SSID.
3. Save your settings in a Profile.
a. Click the Save Profile button.
All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the wizard, or Cancel to return to the previous settings.
Figure 2-4
Note: You will not get a wireless network connection unless the SSID that you enter
exactly matches the SSID used by the access point.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Comments to this Manuals

No comments