Netgear WPN511 User Manual download pdf (Page 15)

NETGEAR RangeMax Wireless PC Card WPN511 User Manual

1-3

v3.0, January 2007

Your WPN511 Wireless PC Card factory default basic settings are:

• Network Name Service Set Identification (SSID): ANY

• Network Mode (Infrastructure or Ad-hoc): Infrastructure

• Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled

Installation

The instructions in this chapter explain how to install the WPN511 to connect to a network with an

access point or router. Wireless security, advanced settings, and Computer-to-Computer (Ad Hoc)

instructions are covered in Chapter 2, “Network Connections and Wireless Security”.

To install the WPN511 Wireless PC Card:

1. First, install the WPN511 software.

Insert the NETGEAR CD. If the CD main page does not appear, double click Autorun.exe on

the CD.

a. Click Install the Software.The Check for Updates window opens.

b. If you are connected to the Internet, click Check for Updates. If not, you can choose to

install from the CD.

Note: In order for the WPN511 Wireless PC Card to communicate with a wireless

access point or wireless adapter, all devices must be set up to use the same

wireless network name (SSID).

Figure 1-1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

No comments

Netgear WPN511 User Manual Page 15