Netgear 778S User's Guide Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
Item
Description
DHCP Server
This field enables (On) or disables (Off) DHCP. See DHCP.
DHCP IP
Range
This specifies the starting and ending address of the range of IP
addresses available for your device to dynamically (that is, not
permanently) assign to computers connected to it. See
DHCP.
DHCP lease
time
This is the amount of time, in minutes, a computer can use its assigned
IP address before it is required to renew the lease. After this time is up,
the computer is automatically assigned a new dynamic IP address. See
DHCP.
Enter a number between 2 and 10080.
DNS mode
This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
§ ManualThe routing hardware assigns DHCP clients the
DNS servers specified in the DNS 1 and DNS 2 fields
Use this option to access a DNS server that provides
customized addressing or if you have a local DNS server on
your network.
Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is
Manual.
§ AutoThe DNS server specified by Virgin Mobile is used.
DNS 1
Address of a manual DNS server. (This field appears only if DNS Mode
is Manual.)
DNS 2
Address of a manual DNS server. (This field appears only if DNS Mode
is Manual.)
DMZ
DMZ Enabled
Enable / disable demilitarized zone.
DMZ Address
If DMZ is enabled, this is the IP address of a single computer used to
receive all unsolicited incoming connections.
Router > Port Forwarding Tab
Port forwarding lets you forward incoming traffic to specific ports and devices (per their local IP
address) on your network. (Normally, incoming traffic is blocked.)
Mingle Manager (Browser) Interface 64
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 168 169

Comments to this Manuals

No comments