Netgear 778S User's Guide download pdf (Page 28)

Note: If you’re having problems, see Cannot Connect Through USB.

Making a Tethered Connection

Your device supports a direct connection through a USB cable to a Windows or Mac computer.

(This is commonly referred to as a “tethered” connection.)

Note: If you’ll be using USB for data transfer (and not just for charging your device), you must

install the device driver. (See “Windows” or “Mac”, below.) No Installation CD is required – your

device supports the TRU-Install feature.

Note: If you’re using Mac OS X 10.4.x, after you connect your device you may see a warning

message that your computer is running on UPS backup battery and that you should perform a

computer shutdown. You can continue with your work. To prevent this message from being

displayed, install the device driver (see “Mac”, below).

Windows

To install the device driver on Windows:

1. Make sure your device is turned on.

2. Connect your device to your computer through the micro-USB cable.

3. If the TRU-Install window is not displayed, in Windows Explorer browse to the TRU

Install entry (under My Computer), then browse to the Win folder and run

Setup.exe.

– or –

If the AutoPlay window opens, click Run setup.exe.

4. In the TRU-Install window, click OK.

5. Follow the onscreen instructions.

Your Network Connection 27

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 168 169

No comments

Netgear 778S User's Guide Page 28