Netgear 778S User's Guide download pdf (Page 27)

c. Enter your device’s PIN.

d. Click Submit.

Your NETGEAR Mingle Mobile Hotspot and the wireless device will communicate and establish

the connection. If no problems are encountered, the message “The device can now access your

hotspot” displays. If your device does not connect, the message “No device was connected …”

displays – try to connect it manually. (See How Do I Connect to Wi-Fi?)

Note: If you want to stop the pairing process, click Cancel.

Connecting Through USB

Use the micro-USB cable (included) to connect your device to your computer.

Note: If you’ll be using USB to connect to the Internet (and not just for charging your device),

you must install the device driver. (See Making a Tethered Connection.)

Use the micro-USB cable when:

● You want to charge your device, but you don’t want to use the AC charger, or the AC

charger is not available.

● Your computer does not have Wi-Fi.

● You want to prevent any other devices from using the hotspot. (See Disable Wi-Fi When

Tethering Device (Connected Through USB).)

Note: You can also block individual devices. See Displaying and Blocking Currently Connected

Devices (Block List) and Allowing or Denying Computers Access to the Network (MAC Filter).

To connect your device to your computer:

1. Insert the larger (Type A) end of the micro-USB cable into your computer.

2. Insert the other end of the cable into the micro-USB port on the side of your device.

Your Network Connection 26

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 168 169

No comments

Netgear 778S User's Guide Page 27