Netgear Switch M4100 User Manual download pdf (Page 546)

100

101

546 | Chapter 32. Captive Portal

ProSafe M4100 and M7100 Managed Switches

captive portal instance is a temporary command executed by the administrator and not saved

in the configuration.

Block a Captive Portal Instance

CLI: Block a Captive Portal Instance

(Netgear Switch)(Config-CP 1)#block

Web Interface: Block a Captive Portal Instance

1. Select Security > Control > Captive Portal > CP Configuration.

A screen similar to the following displays.

2. Under Captive Portal Configuration, scroll down and select the CP 1 check box. Now CP 1

appears in the CP ID field at the top.

3. In the Block field, select Enable.

4. Click Apply to save the settings.

Local Authorization, Create Users and Groups

When using local authentication, the administrator provides user identities for captive portal

by adding unique user names and passwords to the local user database. This configuration is

global to the captive portal component and can contain up to 128 user entries (a RADIUS

server should be used if more users are required). A local user can belong to one or more

groups. There is one group created by default with the group name Default to which all new

users are assigned. All new captive portal instances are also assigned to the Default group.

You can create new groups and modify the user/group association to allow only a subset of

users access to a specific captive portal instance. Network access is granted upon

successful user name, password, and group verification.

1 2 ... 541 542 543 544 545 546 547 548 549 550 551 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 546

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100