Netgear Switch M4100 User Manual download pdf (Page 545)

100

101

Chapter 32. Captive Portal | 545

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b. Scroll down and select the CP 1 check box.

Now CP 1 appears in the CP ID field at the top.

c. In the Admin Mode field, select Enable.

d. Click Apply to save the settings.

3. Enable CP 1 on interface 1/0/1.

a. Select Security > Controls > Captive Portal > CP Binding Configuration.

A screen similar to the following displays.

b. In the CP ID list, select 1.

c. Click Unit 1.

The ports display.

d. Click the gray box under port 1.

e. Click Apply.

Client Access, Authentication, and Control

User verification can be configured to allow access for guest users—users who do not have

assigned user names and passwords. User verification can also be configured to allow

access for authenticated users. Authenticated users are required to enter a valid user name

and password that must first be validated against the local database or a RADIUS server.

Network access is granted once user verification has been confirmed. The administrator can

block access to a captive portal configuration. When an instance is blocked, no client traffic is

allowed through any interfaces associated with that captive portal configuration. Blocking a

1 2 ... 540 541 542 543 544 545 546 547 548 549 550 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 545

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100