Netgear Switch M4100 User Manual Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 559
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
Chapter 7. OSPF | 125
ProSafe M4100 and M7100 Managed Switches
a. Select Routing > IPv6 > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 1/0/1 check box. Now 1/0/1 appears in the
Interface field at the top.
c. Enter the following information:
In the IPv6 Mode field, select Enable.
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
4. Assign the IP address 2001::1 to port 1/0/1.
a. Select Routing > IPv6 >
Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Under IPv6 Prefix Selection, in the Interface list, select 1/0/1.
c. Under IPv6 Interface Configuration, enter the following information:
In the IPv6 Prefix field, enter 2001::1.
In the Length field, enter 64.
In the EUI64 field, select Disable.
In the the Onlink Flag field, select Disable.
In the Autonomous Flag field, select Disable.
d. Click Add to save the settings.
5. Enable OSPFv3 on port 1/0/1.
Page view 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 558 559

Comments to this Manuals

No comments