Netgear Switch M4100 User Manual download pdf (Page 123)

100

101

Chapter 7. OSPF | 123

ProSafe M4100 and M7100 Managed Switches

2. Enable OSPFv3, and assign 1.1.1.1 to router ID.

(Netgear Switch) (Config)#ipv6 router ospf

(Netgear Switch) (Config-rtr)#enable

(Netgear Switch) (Config-rtr)#router-id 1.1.1.1

(Netgear Switch) (Config-rtr)#exit

3. Enable routing mode on the interface 1/0/1, and assign the IP address 2000::1 to IPv6,.

(Netgear Switch) (Config)#interface 1/0/1

(Netgear Switch) (Interface 1/0/1)#routing

(Netgear Switch) (Interface 1/0/1)#ipv6 address 2000::1/64

(Netgear Switch) (Interface 1/0/1)#ipv6 enable

4. Enable OSPFv3 on the interface 1/0/1, and set the OSPF network mode to broadcast.

(Netgear Switch) (Interface 1/0/1)#ipv6 ospf

(Netgear Switch) (Interface 1/0/1)#ipv6 ospf network broadcast

(Netgear Switch) #show ipv6 ospf neighbor

Router ID Priority Intf ID Interface State DeadTime

---------- -------- ------- --------- -------------- -------

2.2.2.2 1 13 1/0/1 Full/BACKUP-DR 34

5. On A2, enable IPv6 unitcast routing on the switch.

(Netgear Switch) (Config)#ipv6 unicast-routing

6. Enable OSPFv3, and assign 2.2.2.2 as the router ID.

(Netgear Switch) (Config)#ipv6 router ospf

(Netgear Switch) (Config-rtr)#enable

(Netgear Switch) (Config-rtr)#router-id 2.2.2.2

(Netgear Switch) (Config-rtr)#exit

7. Enable routing mode on interface 1/0/13, and assign the IP address 2000::2 to IPv6.

(Netgear Switch) (Config)#interface 1/0/13

(Netgear Switch) (Interface 1/0/13)#routing

(Netgear Switch) (Interface 1/0/13)#ipv6 address 2000::2/64

(Netgear Switch) (Interface 1/0/13)#ipv6 enable

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 123

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100