Netgear Switch M4100 User Manual Page 111

  • Download
  • Add to my manuals
  • Print
  • Page
    / 559
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 110
Chapter 7. OSPF | 111
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Scroll down and select the interface 2/0/19 check box.
2/0/19 now appears in the Interface field at the top.
c. Enter the following information:
In the OSPF Area ID field, enter 0.0.0.1.
In the OSPF Admin Mode field, select Enable.
d. Click Apply to save the settings.
7. Configure area 0.0.0.1 as a nssa area.
a. Select Routing > OSPF >
Advanced > NSSA Area Configuration.
A screen similar to the following displays.
b. Enter the following information.
In the Area ID field, enter 0.0.0.1.
In the Import Summary LSAs field, select Disable.
c. Click Add to save the settings.
CLI: Configure Area 1 as an nssa Area on A2
1. Enable routing on the switch.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#router ospf
Page view 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 558 559

Comments to this Manuals

No comments