Netgear MBM621 User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
Mobile Broadband Modem MBM621 User Manual
3-8 Advanced Settings
v1.0, September 2007
To edit or delete a reserved address entry:
1. In the Address Reservation table on the LAN IP Setup screen, select the radio button next to
the reserved address you want to edit or delete.
2. Click Edit or Delete.
Static Routes
Static routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
You can add static routes, and view or change existing static routes from the Static Routes screen.
To add or edit a static route:
1. Log in to the modem at its default LAN address of http://modemlogin.net with its default
user name of admin, and default password of password, or using whatever user name,
password, and LAN address you have chosen for the modem.
2. On the main menu, select Static Routes under the Advanced Heading. The Static Routes
screen appears:
Existing static routes are shown in the Static Routes table.
3. Click Add or Edit, and then enter the settings for the static route.
Route Name. This is for identification purposes only.
Private. If you want to limit access to the LAN only, then select this check box. The static
route will not be reported in RIP.
Active. You must select this check box to make this route effective.
Destination IP Address. The IP address of the final destination.
IP Subnet Mask. If the destination is a single host, type 255.255.255.255.
Figure 3-5
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments