Netgear FA510 Installation Guide

Model FA510 Network Card Installation Guide 1.Double-click on “My Computer” on your desktop, double-click on “Control Panel,” and then double-click o

Model FA510 Network Card Installation Guide 3.Double-click on “Network adapters” and then double-click on “NETGEAR FA510 Fast Ethernet CardBus Card.”

Model FA510 Network Card Installation Guide 4.The “Properties” window opens, and a message regarding the status of the device is displayed in the win

Model FA510 Network Card Installation Guide Model FA510 Network CardStandards Compatibility NetWare tested and approved Microsoft ® Windows 95, Wind

Model FA510 Network Card Installation Guide © 2000 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR™ is a trademark of NETGEAR, Inc. Windows®

Model FA510 Network Card Installation Guide *M-FA510NA-1**M-FA510NA-1*NETGEAR, Inc.4500 Great America ParkwaySanta Clara, CA 95054USAPhone: 1-888-NE

Model FA510 Network Card Installation Guide Instructions in this guide are for users of Windows ® who are installing theModel FA510 Network Card. Fo

Model FA510 Network Card Installation Guide The Model FA510 Network Card is hot swappable, which means it can beinserted into a PC that is either tur

Model FA510 Network Card Installation Guide 1. Using a UTP cable, connect any port on the hub to the port on the RJ-45 adapter cable.2. To connect th

Model FA510 Network Card Installation Guide This guide provides you with instructions for installing the Windows NetworkDriver. The steps given in th

Model FA510 Network Card Installation Guide 3.Select “Search for the best driver...” Click on “Next.” 4.Select “Floppy disk drives.”Select “Specify

Model FA510 Network Card Installation Guide 5.Click on “The updated driver...” and click on “Next.”6.Make sure that the location and the correct dri

Model FA510 Network Card Installation Guide 8.Insert the Drivers and Diagnostics Disk and click on “OK.”9.Click on “OK.”10.Insert the Windows 98 CD-R

Model FA510 Network Card Installation Guide 11.Click on “Finish.” 12. Be sure to remove the Drivers and Diagnostics Disk and the Windows 98 CD-ROM b