Netgear GS516TP-100EUS Datasheet Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 31
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
Physical Description
13
GS516TP Gigabit PoE Smart Switch
System LEDs
The following table describes the system LED designations.
Device Hardware Interfaces
The following sections describe the ports and buttons found on the smart switch.
RJ-45 Ports
RJ-45 ports are AutoSensing ports. When you insert a cable into an RJ-45 port, the switch
automatically ascertains the maximum speed (10, 100, or 1000 Mbps) and duplex mode
(half-duplex or full-duplex) of the attached device. All ports support only an unshielded
twisted-pair (UTP) cable terminated with an 8-pin RJ-45 plug.
To simplify the procedure for attaching devices, all RJ-45 ports support Auto Uplink. This
technology allows attaching devices to the RJ-45 ports with either straight-through or
crossover cables. When you insert a cable into the switch’s RJ-45 port, the switch
automatically does the following:
Senses whether the cable is a straight-through or crossover cable.
Determines whether the link to the attached device requires a “normal” connection (such
as when you are connecting the port to a computer) or an “uplink” connection (such as
when you are connecting the port to a router, switch, or hub).
Configures the RJ-45 port to enable communications with the attached device, without
requiring user intervention. In this way, the Auto Uplink technology compensates for
setting uplink connections, while eliminating concern about whether to use crossover or
straight-through cables when you are attaching devices.
Table 2-2. System LEDs
LED Designation
Power Solid green. The device is powered on; runtime code is operating.
Blinking yellow. The device is in the boot stage.
Off. Power is not supplied to the device.
Fan Solid yellow . The fan has experienced a failure.
Off . The fan is operating normally.
Max PoE LED Solid yellow . Less than 7W of PoE power is available.
Blinking yellow . The PoE Max LED was lit within the previous two minutes.
Off. At least 7W of PoE power is available.
PD15 and PD16 Off. No PSE device is connected to ports 15 or 16.
Solid green. An 802.3at PSE device is connected to ports 15 or 16.
Solid yellow. An 802.3af PSE device is connected to ports 15 or 16.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Comments to this Manuals

No comments